Search results
1 – 10 of 11Rusya Iryanti Yahaya, Norihan Md Arifin, Ioan Pop, Fadzilah Md Ali and Siti Suzilliana Putri Mohamed Isa
This paper aims to study the stagnation point flow of Al2O3–Cu/H2O hybrid nanofluid over a radially shrinking disk with the imposition of the magnetic field, viscous-Ohmic…
Abstract
Purpose
This paper aims to study the stagnation point flow of Al2O3–Cu/H2O hybrid nanofluid over a radially shrinking disk with the imposition of the magnetic field, viscous-Ohmic dissipation and convective boundary condition.
Design/methodology/approach
Similarity variables are introduced and used in reducing the governing partial differential equations into a system of ordinary differential equations. A built-in bvp4c solver in MATLAB is then used in the computation of the numerical solutions for equations (7) and (8) subject to the boundary conditions (9). Then, the behavior of the flow and thermal fields of the hybrid nanofluid, with various values of controlling parameters, are analyzed.
Findings
The steady flow problem resulted in multiple (dual) solutions. A stability analysis performed to identify the stable solution applicable in practice revealed that the first solution is stable while the second solution is unstable. The skin friction coefficient and Nusselt number of the hybrid nanofluid are found to be greater than the Al2O3–H2O nanofluid. Thus, the hybrid nanofluid has a better heat transfer performance than the nanofluid. Besides that, the presence of the magnetic field, suction, convective boundary condition and the enhancement of nanoparticle volume fraction of Cu augments the skin friction coefficient and Nusselt number of the hybrid nanofluid. Meanwhile, the presence of viscous-Ohmic dissipation reduces the heat transfer performance of the fluid.
Originality/value
To the best of the authors’ knowledge, the present results are original and new for the study of the flow and heat transfer of Al2O3–Cu/H2O hybrid nanofluid past a permeable radially shrinking disk. Considerable efforts have been directed toward the study of the boundary layer flow and heat transfer over stretching/shrinking surfaces and disks because of its numerous industrial applications, such as electronic, power, manufacturing, aerospace and transportation industries. Common heat transfer fluids such as water, alumina, cuprum and engine oil have limited heat transfer capabilities due to their low heat transfer properties. In contrast, metals have higher thermal conductivities than these fluids. Therefore, it is desirable to combine the two substances to produce a heat transfer medium that behaves like a fluid but has higher heat transfer properties.
Details
Keywords
Mohamad Mustaqim Junoh, Fadzilah Md Ali, Norihan Md Arifin, Norfifah Bachok and Ioan Pop
The purpose of this paper is to investigate the steady magnetohydrodynamics (MHD) boundary layer stagnation-point flow of an incompressible, viscous and electrically conducting…
Abstract
Purpose
The purpose of this paper is to investigate the steady magnetohydrodynamics (MHD) boundary layer stagnation-point flow of an incompressible, viscous and electrically conducting fluid past a stretching/shrinking sheet with the effect of induced magnetic field.
Design/methodology/approach
The governing nonlinear partial differential equations are transformed into a system of nonlinear ordinary differential equations via the similarity transformations before they are solved numerically using the “bvp4c” function in MATLAB.
Findings
It is found that there exist non-unique solutions, namely, dual solutions for a certain range of the stretching/shrinking parameters. The results from the stability analysis showed that the first solution (upper branch) is stable and valid physically, while the second solution (lower branch) is unstable.
Practical implications
This problem is important in the heat transfer field such as electronic cooling, engine cooling, generator cooling, welding, nuclear system cooling, lubrication, thermal storage, solar heating, cooling and heating in buildings, biomedical, drug reduction, heat pipe, space aircrafts and ships with better efficiency than that of nanofluids applicability. The results obtained are very useful for researchers to determine which solution is physically stable, whereby, mathematically more than one solution exist.
Originality/value
The present results are new and original for the problem of MHD stagnation-point flow over a stretching/shrinking sheet in a hybrid nanofluid, with the effect of induced magnetic field.
Details
Keywords
Najiyah Safwa Khashi'ie, Iskandar Waini, Syazwani Mohd Zokri, Abdul Rahman Mohd Kasim, Norihan Md Arifin and Ioan Pop
This paper aims to accentuate the behavior of second-grade hybrid Al2O3–Cu nanofluid flow and its thermal characteristics driven by a stretching/shrinking Riga plate.
Abstract
Purpose
This paper aims to accentuate the behavior of second-grade hybrid Al2O3–Cu nanofluid flow and its thermal characteristics driven by a stretching/shrinking Riga plate.
Design/methodology/approach
The second-grade fluid is considered with the combination of Cu and Al2O3 nanoparticles. Three base fluids namely water, ethylene glycol (EG) and methanol with different Prandtl number are also examined. The formulation of the mathematical model of second-grade hybrid nanofluid complies with the boundary layer approximations. The complexity of the governing model is reduced into a simpler differential equations using the similarity transformation. The bvp4c solver is fully used to solve the reduced equations. The observation of multiple solutions is conducted for the assisting (stretching) and opposing (shrinking) cases.
Findings
The impact of suction parameter, second-grade parameter, electromagnetohydrodynamics (EMHD) parameter, velocity ratio parameter and the volumetric concentration of the alumina and copper nanoparticles are numerically analyzed on the velocity and temperature profiles, skin friction coefficient and local Nusselt number (thermal rate) of the second-grade Al2O3–Cu/water. The solution is unique when (static and stretching cases) while dual for a specific range of negative in the presence of suction effect. Based on the appearance of the first solution in all cases of, it is physically showed that the first solution is stable. Further examination reveals that the EMHD and suction parameters are the contributing factors for the thermal enhancement of this non-Newtonian working fluid. Meanwhile, the viscosity of the non-Newtonian fluid also plays a significant role in the fluid motion and heat transfer rate based on the finding that the EG base fluid produces the maximum heat transfer rate but the lowest critical value and skin friction coefficient.
Originality/value
The results are novel and contribute to the discovery of the hybrid nanoparticles’ performance in the non-Newtonian second-grade fluid. Besides, this study is beneficial to the researchers in this field and general audience from industries regarding the factors, which contributing to the thermal enhancement of the working fluid.
Details
Keywords
Najiyah Safwa Khashi’ie, Iskandar Waini, Norihan Md Arifin and Ioan Pop
This paper aims to analyse numerically the unsteady stagnation-point flow of Cu-Al2O3/H2O hybrid nanofluid towards a radially shrinking Riga surface with thermal radiation.
Abstract
Purpose
This paper aims to analyse numerically the unsteady stagnation-point flow of Cu-Al2O3/H2O hybrid nanofluid towards a radially shrinking Riga surface with thermal radiation.
Design/methodology/approach
The governing partial differential equations are transformed into a set of ordinary (similar) differential equations by applying appropriate transformations. The numerical computation of these equations including the stability analysis is conducted using the bvp4c solver.
Findings
Two solutions are possible within the allocated interval: shrinking parameter, unsteadiness decelerating parameter, electro-magneto-hydrodynamics (EMHD) parameter, nanoparticles volumetric concentration, radiation parameter and width parameter, whereas the stability analysis certifies that the first (upper branch) solution, which fulfills the boundary conditions is the physical/real solution. The EMHD parameter generated from the application of Riga plate enhances the skin friction coefficient as well as the heat transfer process. The width parameter d is also one of the factors in the deterioration of the skin friction coefficient and heat transfer rate. It is crucial to control the width parameter of the magnets and electrodes to obtain the desired outcome. The radiation parameter is not affecting the boundary layer separation because the critical values are unchanged. However, the addition of radiation and unsteadiness decelerating parameters boosts the thermal rate.
Originality/value
The results are novel and contribute to the discovery of the flow and thermal performance of the hybrid nanofluid subjected to a radially shrinking Riga plate. Besides, this work is beneficial to the other researchers and general audience from industries regarding the factors which contribute to the thermal enhancement of the working fluid.
Details
Keywords
Nur Syahirah Wahid, Norihan Md Arifin, Najiyah Safwa Khashi'ie, Ioan Pop, Norfifah Bachok and Ezad Hafidz Hafidzuddin
The purpose of this paper is to numerically investigate the hybrid nanofluid flow with the imposition of magnetohydrodynamic (MHD) and radiation effects alongside the convective…
Abstract
Purpose
The purpose of this paper is to numerically investigate the hybrid nanofluid flow with the imposition of magnetohydrodynamic (MHD) and radiation effects alongside the convective boundary conditions over a permeable stretching/shrinking surface.
Design/methodology/approach
The mathematical model is formulated in the form of partial differential equations (PDEs) and are then transformed into the form of ordinary differential equations (ODEs) by using the similarity variables. The deriving ODEs are solved numerically by using the bvp4c solver in MATLAB software. Stability analysis also has been performed to determine the stable solution among the dual solutions obtain. For method validation purposes, a comparison of numerical results has been made with the previous studies.
Findings
The flow and the heat transfer of the fluid at the boundary layer are described through the plot of the velocity profile, temperature profile, skin friction coefficient and local Nusselt number that are presented graphically. Dual solutions are obtained, but only the first solution is stable. For the realizable solution at the shrinking surface, the proliferation of nanoparticle volume fraction (copper) and magnetic (magnetohydrodynamics) parameters can impede the boundary layer separation. Also, Biot number could enhance the temperature profile and the heat transfer rate at the shrinking surface region. The incrementation of 0.1% of Biot number has enhanced the heat transfer rate by approximately 0.1% and the incrementation of 0.5% volume fraction for copper has reduced the heat transfer rate by approximately 0.17%.
Originality/value
The presented model and numerical results are original and new. It can be used as a future reference for further investigation and related practical application. The main contribution of this investigation includes giving the initial prediction and providing the numerical data for the other researchers for their future reference regarding the impacts of nanoparticles volumetric concentration towards the main physical quantities of interest in the presence of magnetic and radiation parameters with the convective boundary conditions.
Details
Keywords
Siti Hidayah Muhad Saleh, Norihan Md. Arifin, Roslinda Nazar and Ioan Pop
The purpose of this paper is to present the results of an analysis performed to study unsteady mixed convection at the stagnation point flow over a plate moving along the…
Abstract
Purpose
The purpose of this paper is to present the results of an analysis performed to study unsteady mixed convection at the stagnation point flow over a plate moving along the direction of flow impingement. The similarity transformations are used to transform the governing nonlinear partial differential equation to a system of an ordinary differential equation.
Design/methodology/approach
The transformed equations are then solved numerically by a shooting technique together with bvp4c function.
Findings
The numerical results are compared with the corresponding results from previous researchers. The effects of the unsteadiness Parameter A, Prandtl number Pr, mixed convection parameter λ for plane (m = 0) and axisymmetric (m = 1) flow on the shear stress or the skin friction and heat transfer coefficients, as well as the velocity and temperature profiles, are presented and discussed.
Originality/value
Dual solutions for the opposing flow and multiple solutions for the assisting flow are found.
Details
Keywords
Najiyah Safwa Khashi’ie, Norihan Md Arifin, Ioan Pop, Roslinda Nazar, Ezad Hafidz Hafidzuddin and Nadihah Wahi
This paper aims to scrutinize the analysis of non-axisymmetric Homann stagnation point flow and heat transfer of hybrid Cu-Al2O3/water nanofluid over a stretching/shrinking flat…
Abstract
Purpose
This paper aims to scrutinize the analysis of non-axisymmetric Homann stagnation point flow and heat transfer of hybrid Cu-Al2O3/water nanofluid over a stretching/shrinking flat plate.
Design/methodology/approach
The similarity transformation which fulfils the continuity equation is opted to transform the coupled momentum and energy equations into the nonlinear ordinary differential equations. Numerical solutions which are elucidated in the tables and graphs are obtained using the bvp4c solver.
Findings
Non-unique solutions (first and second) are feasible for both stretching and shrinking cases within the specific values of the parameters. First solution is the physical/real solution based on the execution of stability analysis. An upsurge of the ratio of the ambient fluid strain rate to the plate strain rate can delay the boundary layer separation, whereas a boost of the ratio of the ambient fluid shear rate to the plate strain rate only accelerates the separation of boundary layer. The heat transfer rate of hybrid nanofluid is greater for the stretching case than the shrinking case. However, for the shrinking case, the heat transfer rate intensifies with the increment of the copper (Cu) nanoparticles volume fraction, whereas a contrary result is found for the stretching case.
Originality/value
The present numerical results are original and new. It can contribute to other researchers on electing the relevant parameters to optimize the heat transfer process in the modern industry, and the right parameters to generate non-unique solution so that no misjudgment on flow and heat transfer features.
Details
Keywords
Najiyah Safwa Khashi'ie, Norihan Md Arifin, Natalia C. Rosca, Alin V. Rosca and Ioan Pop
The purpose of this paper is to study the effects of thermal radiation and homogeneous-heterogeneous reactions in the three-dimensional hybrid nanofluid flow past a permeable…
Abstract
Purpose
The purpose of this paper is to study the effects of thermal radiation and homogeneous-heterogeneous reactions in the three-dimensional hybrid nanofluid flow past a permeable stretching/shrinking sheet.
Design/methodology/approach
The combination of aluminum oxide (Al2O3) and copper (Cu) nanoparticles with total volumetric concentration is numerically analyzed using the existing correlations of hybrid nanofluid. With the consideration that both homogeneous and heterogeneous reactions are isothermal while the diffusion coefficients of both autocatalyst and reactant are same, the governing model is simplified into a set of differential (similarity) equations.
Findings
Using the bvp4c solver, dual solutions are presented, and the stability analysis certifies the physical/real solution. The findings show that the suction parameter is requisite to induce the steady solution for shrinking parameter. Besides, the fluid concentration owing to the shrinking sheet is diminished with the addition of surface reaction.
Originality/value
The present findings are novel and can be a reference point to other researchers to further analyze the heat transfer performance and stability of the working fluids.
Details
Keywords
Najiyah Safwa Khashi'ie, Norihan M. Arifin and Ioan Pop
This study aims to analyze the unsteady flow of hybrid Cu-Al2O3/water nanofluid over a permeable stretching/shrinking disc. The analysis of flow stability is also purposed because…
Abstract
Purpose
This study aims to analyze the unsteady flow of hybrid Cu-Al2O3/water nanofluid over a permeable stretching/shrinking disc. The analysis of flow stability is also purposed because of the non-uniqueness of solutions.
Design/methodology/approach
The reduced differential equations (similarity) are solved numerically using the aid of bvp4c solver (Matlab). Two types of thermophysical correlations for hybrid nanofluid (Type 1 and 2) are adopted for the comparison results. Using correlation Type 1, the heat transfer and flow analysis including the profiles (velocity and temperature) are presented in the figures and tables with different values control parameters. Three sets of hybrid nanofluid are analyzed: Set 1 (1% Al2O3 + 1% Cu), Set 2 (0.5% Al2O3 + 1% Cu) and Set 3 (1% Al2O3 + 0.5% Cu).
Findings
The comparison of numerical values between present (Types 1 and 2 correlations) and previous (Type 2 correlations) results are in a good compliance with approximate percent relative error. The appearance of two solutions is noticed when the suction parameter is considered and the unsteady parameter is less than 0 (decelerating flow) for both stretching and shrinking disc while only one solution is possible for steady flow. The hybrid nanofluid in Set 1 can delay the separation of boundary layer but the hybrid nanofluid in Set 3 has the greatest heat transfer rate. Moreover, the inclusion of wall mass suction for stretching case can generate a significant increment of heat transfer rate approximately 90% for all fluids (water, single and hybrid nanofluids).
Originality/value
The present findings are novel and can be a reference point to other researchers to further analyze the heat transfer performance and stability of the working fluids.
Details
Keywords
Rusya Iryanti Yahaya, Norihan M. Arifin, Roslinda Nazar and Ioan Pop
The purpose of this paper is to study the flow and heat transfer of a hybrid nanofluid, Cu–Al2O3/water, past a permeable stretching/shrinking sheet. The effects of Brownian motion…
Abstract
Purpose
The purpose of this paper is to study the flow and heat transfer of a hybrid nanofluid, Cu–Al2O3/water, past a permeable stretching/shrinking sheet. The effects of Brownian motion and thermophoresis are considered here.
Design/methodology/approach
Similarity transformations are used to reduce the governing partial differential equations to a system of ordinary (similarity) differential equations. A MATLAB solver called the bvp4c is then used to compute the numerical solutions of equations (12) to (14) subject to the boundary conditions of equation (15). Then, the effects of various physical parameters on the flow and thermal fields of the hybrid nanofluid are analyzed.
Findings
Multiple (dual) solutions are found for the basic boundary layer equations. A stability analysis is performed to see which solutions are stable and, therefore, applicable in practice and which are not stable. Besides that, a comparison is made between the hybrid nanofluid and a traditional nanofluid, Cu/water. The skin friction coefficient and Nusselt number of the hybrid nanofluid are found to be greater than that of the other nanofluid. Thus, the hybrid nanofluid has a higher heat transfer rate than the other nanofluid. However, the increase in the shrinking parameter reduces the velocity of the hybrid nanofluid.
Originality/value
The present results are original and new for the study of the flow and heat transfer past a permeable stretching/shrinking sheet in Cu–Al2O3/water hybrid nanofluid.
Details